Merica·Estate Hunter
Own · Insurance · Problems

Your 4-point inspection failed

A 4-point does not have a pass mark. It is a report, and each carrier decides what it can live with. A finding that one insurer declines outright, another will write with a condition or a higher premium. Before you spend anything, find out which finding is actually blocking you — the answer is often one item, not the report.

Your 4-point inspection failedRoof: What they are looking for Age, remaining life, cond…; Typical decline trigger Age past the carrier’s th…. Electrical: What they are looking for Panel brand, wiring type,…; Typical decline trigger Federal Pacific or Zinsco…. Plumbing: What they are looking for Supply and drain material…; Typical decline trigger Polybutylene supply, fail…. HVAC: What they are looking for Age, condition, whether i…; Typical decline trigger Very old or non-functioni…What they are looking forTypical decline triggerRoofAge, remaining life, cond…Age past the carrier’s th…ElectricalPanel brand, wiring type,…Federal Pacific or Zinsco…PlumbingSupply and drain material…Polybutylene supply, fail…HVACAge, condition, whether i…Very old or non-functioni…
What "failed" usually means in practice

Nobody stamps a 4-point as failed. What happens is that an underwriter reads it, finds something on their decline list, and refuses the application. So the useful question is never "did it pass" — it is "which specific line caused this, and does every carrier treat it the same way?" Frequently they do not.

The four points, and what each one is really about

SystemWhat they are looking forTypical decline trigger
RoofAge, remaining life, condition, previous repairsAge past the carrier’s threshold, or visible failure
ElectricalPanel brand, wiring type, capacity, hazardsFederal Pacific or Zinsco panel, cloth or aluminium branch wiring, knob and tube
PlumbingSupply and drain material, age, active leaksPolybutylene supply, failing cast iron drains
HVACAge, condition, whether it functionsVery old or non-functioning system

Triage: which findings are deal-breakers and which are noise

Not every item carries the same weight. Roughly in order of how likely each is to end an application outright:

Do not fix everything on the list

The instinct after a decline is to clear the whole report. That is usually the most expensive route to the same outcome. Ask the underwriter — through your agent — which specific findings caused the decision. Very often it is one, and the other eleven items are documentation rather than obstacles.

The order that gets you insured fastest

  1. Get the actual reason in writing. If this followed a non-renewal rather than a new application, the insurer is required to state the reason.
  2. Shop before you spend. Carrier appetite differs enormously on exactly these findings. A second or third quote is free and sometimes solves it outright.
  3. Fix the single blocking item, with a permit and a final inspection where one is required.
  4. Get a wind mitigation inspection at the same time if you do not have a current one. It is the cheapest way to look like a better risk, and it offsets premium.
  5. Re-inspect and resubmit with the paperwork attached. A replaced panel with a closed permit is a different application from a claim that it was replaced.
Do not let cover lapse while you sort it out

If this arose from a non-renewal, remember the notice rule: cover stays in force until 45 days after the notice is actually given, or until replacement cover starts. And if you are between policies, a gap is worse than a bad premium — it can breach your mortgage and the next insurer will price the lapse itself.

If you are mid-purchase

This is the moment the Florida buying process most often breaks, and it usually arrives late in the inspection period. A $75–$150 inspection has just told you the house may be uninsurable, and your deposit is on the clock.

Related

What a 4-point costsAnd when not to volunteer for one at all.Federal Pacific panelThe hardest single stop on the list.Polybutylene pipesThe plumbing finding that most often declines a file.Cancelled or non-renewedYour rights, and the notice rule that buys you time.
A home inspector in safety vest and hard hat checks doorframe alignment with clipboard outdoors.
A home inspector in safety vest and hard hat checks doorframe alignment with clipboard outdoors.Photograph: RDNE Stock project / Pexels

Common questions

What happens if you fail a 4-point inspection in Florida?

There is no formal pass or fail. An underwriter reads the report and may decline, apply a condition, or charge more. Because carriers differ on what they will accept, a decline from one insurer often does not mean the house is uninsurable.

What fails a 4-point inspection most often?

Roof age or condition by volume, then obsolete electrical panels such as Federal Pacific or Zinsco, polybutylene supply plumbing, and failing cast iron drain lines. Aged HVAC rarely decides it alone.

Do I have to fix everything on the 4-point report?

Usually not. Ask through your agent which specific findings caused the decision — it is frequently one item, and fixing the whole list is the most expensive route to the same result.

Can I get insurance after failing a 4-point?

Often yes. Shop other carriers first, since appetite differs sharply on these exact findings, then fix the single blocking item with a permit and closed inspection and resubmit with the documentation.

Can an insurer refuse me because of roof age alone?

Not under 15 years. Past that, an authorised inspector certifying at least five years of remaining useful life blocks a non-renewal based on roof age.


Underwriting guidelines are each insurer’s own and are not published, so what one carrier declines another may accept. Statutory protections on roof age and non-renewal notice are cited above.